Would appreciate any learned opinions on whether requesting fastpath for my dsl connection would be a good idea before I make the call to CL.
Stats as reported by the modem are:
WAN Status
Connection Status
Connection Status
Broadband: CONNECTED
Internet Service Provider: CONNECTED
PPP Status
PPP Parameter Status
User Name: connect@centurylink.com
PPP Type: PPPoE
LCP State: UP
IPCP State: UP
Authentication Failures: 0
Session Time: 2 Days, 4H:54M:19S
Packets Sent: 3892329
Packets Received: 5394661
Broadband Status
Broadband Parameter Status
VPI: 8
VCI: 35
Broadband Mode Setting: MULTIMODE
Broadband Negotiated Mode: G.DMT
Connection Status: CONNECTED
Downstream Speed: 1760 Kbps
Upstream Speed: 288 Kbps
Retrains: 0
Retrain Timer: 2 Days, 4H:47M:50S
ATM QoS class: UBR
Near End CRC Errors Interleave: 0
Near End CRC Errors Fastpath : N/A
Far End CRC Errors Interleave : 0
Far End CRC Errors Fastpath : N/A
30 Minute Near End CRC Interleave : 0
30 Minute Near End CRC Fastpath : N/A
30 Minute Far End CRC Interleave : 0
30 Minute Far End CRC Fastpath : N/A
Near End RS FEC Interleave : 0
Near End RS FEC Fastpath : N/A
Far End RS FEC Interleave : 0
Far End RS FEC Fastpath : N/A
30 Minute Near End FEC Interleave : 0
30 Minute Near End FEC Fastpath : N/A
30 Minute Far End FEC Interleave : 0
30 Minute Far End FEC Fastpath : N/A
30 Minute Discarded Packets Downstream : 0
30 Minute Discarded Packets Upstream : 0
SNR Downstream : 33 dB
SNR Upstream : 13 dB
Attenuation Downstream : 20 dB
Attenuation Upstream : 13 dB
Power Downstream 4.9 dBm
Power Upstream 0.4 dBm
Any additional comments or suggestions for improvement welcome.
Thanks.
↧