Hey all, tomorrow my second line is getting put in (I was informed by our tech that bonding isn't available in my area even with a business account, but a second line can be installed, so that is what I am doing). Here is my setup that I'm looking at doing, and please let me know if there is anything you would do a little different.
Both modems in bridge mode connected to my RT-AC87U running AsusMerlin with dual wan turned on in Load Balancing mode. (The router can handle both PPPoE handshakes and connections.) I am wanting my traffic to be shared 50/50 I believe so I think my ratio should be set at 1:2 (check my math for me on this please).
I know that I won't truly get 26Mbps down, but rather 2 channels of 13Mbps.
The wiring that I have done on my first line (CTL is sending a tech tomorrow to install since there has to be a new DSL thing put in my box, hopefully they will install a new box, mine is way out of date) is done with Cat6 line, with one wire on each of the ring and tip setups.
Thanks all!
↧