CenturyLink ZyXEL PK5001Z Wireless Gateway
Firmware Version: CZP002-4.3.009.16 (latest as of this writing)
Hardware Revision: A0B
PROBLEM:
with Channel set to 1 in router, inSSIDer shows channel 1+5
with Channel set to 11 in router, inSSIDer shows channel 11+7
WHAT I WANT IS
with Channel set to 1 in router, inSSIDer shows channel 1
with Channel set to 11 in router, inSSIDer shows channel 11
As I understand it, I am getting 1+5 instead of 1, and 11+7 instead of 11
because Channel bandwidth is set to 20/40MHz instead of 20MHz or 40MHz.
I want to set Channel bandwidth to 20MHz, however, I cannot find the place to change this. I looked at settings in Wireless Setup and Advanced Setup, and everywhere else. Perhaps on this device this setting goes by a difference name?
MY SETTINGS: I am using all defaults with these exceptions:
SSID: xxxxxxxxx (default* = CenturyLink####)
Security Type: WPA2-Personal (default = WPA-WPA2-Personal)
Encryption Type: AES (default = BOTH meaning TKIP+AES)
Security Key/Passphrase: xxxxxxxxxxxxxxx (default = ...)
Channel: 1 (default = auto detect)
802.11 Mode: 802.11g or 802.11n (default = 802.11b 802.11g 802.11n Mode)
QUESTION:
How can I set/change Channel bandwidth to 20MHz?
Thank you for your help,
Lilla
↧