I have a Cisco 877W that I've been trying to setup for my CenturyLink VDLS2+ service for weeks now. I'm about pull out (what's left) of my hair.
I have CenturyLink VDSL2+ service at my house, currently at 12mb/s down, 896k up. On Monday, I'll be bumped up to 40mbs/20mbs. I also have a /29 block of IPs, but will be upgrading to a /28 on Monday as well (once I know the 40/20 is working fine).
I've gone through many sample configs, but all will not apply due to one reason or another. Here are some common lines I get the "invalid" message when trying to load the config. Keep in mind, this is supposed to be for the same router. It's almost as if they're using a different firmware/IOS than me:
security authentication failure rate 3 log pppoe enable group global encapsulation dot1Q 201 interface Ethernet0
Here is the result of show version:
cisco877#sho verCisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Thu 14-Aug-08 07:43 by prod_rel_team ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE cisco877 uptime is 2 hours, 44 minutesSystem returned to ROM by reloadSystem image file is "flash:c870-advsecurityk9-mz.124-15.T7.bin"Last reload reason: Reload Command This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email toexport@cisco.com. Cisco 877W-M (MPC8272) processor (revision 0x400) with 118784K/12288K bytes of memory.Processor board ID FHK131324W3MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x104 FastEthernet interfaces1 ATM interface1 802.11 Radio128K bytes of non-volatile configuration memory.28672K bytes of processor board System flash (Intel Strataflash) Configuration register is 0x2102
...and finally, here is my current config:
!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname cisco877!boot-start-markerboot-end-marker!enable secret 5 <secret>enable password <password>!no aaa new-model!!dot11 syslogno ip routingno ip cef!!ip domain name cabuzzi.com!!username root privilege 15 secret 5 <secret>username admin privilege 15 secret 5 <secret>.!!archive log config hidekeys!!ip ssh version 2!bridge irb!!interface ATM0 no ip address no ip route-cache shutdown no atm ilmi-keepalive dsl operating-mode auto!interface FastEthernet0!interface FastEthernet1 shutdown!interface FastEthernet2 shutdown!interface FastEthernet3 shutdown!interface Dot11Radio0 no ip address no ip route-cache shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root!interface Vlan1 no ip address no ip route-cache bridge-group 1!interface BVI1 description Inside LOCAL LAN ip address 192.168.1.254 255.255.255.0 ip virtual-reassembly!ip forward-protocol nd!no ip http serverno ip http secure-server!snmp-server community cabuzzi RO!!!control-plane!bridge 1 protocol ieeebridge 1 route ipbanner motd ^C Cabuzzi DSL RouterCabuzzi DSL Router^C!line con 0 logging synchronous no modem enableline aux 0line vty 0 4 password <password> logging synchronous login local transport input ssh!scheduler max-task-time 5000end
I'm great with more common Cisco devices... but this one is just kicking my ass.
↧