Hello, this isn't my primary modem as I have the NETGEAR DGND3700v2 as my primary modem/router and my old Actiontec GT-701WG modem/router as a backup. The problem comes as I bricked the backup with a firmware reinstall problem. Anyway, i went out and bought an old ZyXEL PK5000Z modem/router to replace that. The modem boots properly and sends out a wireless signal and everything but the DSL light keeps blinking. I unplugged every phone line in the house, I've changed some settings and no matter what it doesn't seem to work. The DSL light will blink slow, then fast, then slow, then fast, etc. The "line" jack must work fine though because when I plug a phone into the "phone" jack with a phone line going from the wall jack to the "line" jack I still get a dial tone. Why is it blinking? are there any setting that I need to change or do I need to just be patient and let the modem sit for awhile and connect to CenturyLink?
↧